Frequently Asked Questions about Bathing Areas

Monobloc bathtubs do not require an additional panel for installation. They have the following advantages: low internal depth, easy to install on finished floor and fast discharge of water thanks to the 90 mm flusher.

We prefer acrylic material in our products as it is durable, lightweight and hygienic. It is also easy to install, clean, and easy to maintain and repair.

In our products, the following thickness of acrylic plates are used: 4 mm for rectangular shower trays up to 170 x75 cm, 5 mm for all products which are above 170x75 cm, 5 mm for all cornered shower trays without considering any difference of size and 3.2 mm for bathtubs and panels.

Leg systems are manufactured according to high quality standards. They are coated using a hot-dip galvanizing process and static oven-drying is applied to them. Therefore, there is almost no risk of rust.

Colour differences may occur between the body and the polyester panels in time. Colour differences do not occur with the shower trays and panels made of acrylic material.