Frequently Asked Questions about Urinals

Each individual product has a recommended installation height depending upon the model's aesthetics and dimensions.

When the PIR detects movement at the urinal, an electronic pulse from the infra-red sensor is sent to the valve which opens the normally-closed solenoid valve and water flows to the urinal bowl through the spreader. The valve will then close after the allotted amount of water is flushed through (this can be altered depending upon model type).

The only urinals which require a bottle trap are Arkitekt 6546 and the 4319 ranges.

The syphonic urinals are designed to be installed with a concealed feed as they have been designed and manufactured with a back entry feed point.

The urinals are designed to be installed with either a concealed/exposed cistern or via a direct mains feed in conjunction with a suitable mains fed solenoid actuator containing an air break valve.